-
58X1800mm 3 laag zonne-geiser vacuümbuis
47*1500mm Evacuated tube 58*1800mm Solar Vacuum Tube Features: Qirui All-glass Vacuum Tube is made of dual borosilicate glass tubes, the space between the two tubes is evacuated. The AL/N/AL selective coating on the outer wall of the inner tube absorbs sunshine and transforms it into heat which in turn heats the cold water in the inner tube. When the water in the tube is heated, its density will decrease and will go upward into the tank; Meanwhile the cold water in the tank
-
Zonneboilerpomp met een maximale opvoerhoogte van 13 meter
Solar Hot Water Heater Pump with head max 13 meter Max Head: 6M, 9M,11M,13M, Suitable for hot water, heating systems, cooling and air conditioning systems. Solar Water Pump Features Flow Switch automatically control Low-noise,no leakage,environmental protection (the pump body is treated by antiseptic electric spray painting),beautiful apperance,convenient installation. Material of parts Motor wire:copper Rotter can:stainless steel Pump body:cast iron Shaft:ceramic/stainless
-
Onderdelen-frame/beugel van zonneverwarmingstoestellen
Solar heater parts-FRAME/BRACKET 1, customize frame will be welcomed. 2, material: STAINLESS STEEL, GALVANIZED STEEL, COLOT STEEL, ALLUMINUM 3, COLOR: Gray, blue, silver, black etc. Solar Heater Features 1. Can he operated completely automatic if connect with intelligent controller. 2. Simple structure, easy plug-in installation, can be installed both on flat and inclined roof. 3. Can be used with an auxiliary electric booster as to provide hot water without sunshine. 4.
-
Messing Kogelkraan - Zonneboiler Accessoires
Brass Ball Valve-Solar Water Heater Accessories Brass Ball Valve SIZE: 1/2", 3/4" Max. working pressure: 1Mpa Ideal working pressure: 0.1-0.6Mpa Hot water temperature: 50~80ºC Max. water temperature: 100 ºC Adjusting scope: 30-55ºC\35-65ºC Temperature control accuracy: ±2ºC Cold\hot water-in pressure differential: 8:1 Through-diameter G1/2"\G3/4" Flow: 1m3/h~20m3/h Product standard: Q/BXJ02.03-2003 Installation Instructions Suitable both Flat roof and Pitched roof OUR SERVICE
-
Constante temperatuur gemengd waterklep als zonneboiler accessoires
Constant temperature mixed water valve Thermostatic Mixing Valve Working principle A heat sensor is installed at the water-outlet of the constant temperature mixed water valve, the valve core in the valve body is moved by the temperature sensor to block or open the cold, hot water-inlet. The hot water opening is increased while the cold water opening is decreased, when the temperature adjusting knob sets a certain temperature, the cold, hot water ratio at the water-outlet
-
Temperatuur- en drukregelklep Tp-klep
Solar Water Heater T/P Valve 1. Provide safe to us 2 Prolong the lifetime of the solar water hearer Solar Water Heater T/P Valve Temperature and pressure relief valve tp valve Products Detail T/P valve 1, CE certificate 2, Function: Relief pressure 3, Use: Pressurized water heater 4, Pressure range: 99degree/7bar Designed and checked Based on American "ANSI Z21.22" Standard. 1.Using Method Temperature and Pressure Relief Valves is suitable for Installing at the Pressurized
-
Sr500 Pioneer Solar Water Heater Temperatuur Sensor
SR500/Pioneer Solar Water Heater Controller Sensor (Suitable for SR500/Pioneer Solar Water Heater Controller) sensor for low pressure solar water heater intelligent controller SR500 Suitable for open loop solar Thermal water heater: low pressure solar water heater(CNP-58) and Pre-heated solar water heater. Model TK-7 and TK-8A sensor NTC10K, B=3950 Function adding water, control electric heating elements etc. The device type TK series is fully automatically controlled by
-
58*1800mm warmtepijp vacuümbuis
47*1500mm Evacuated tube 58*1800mm Solar Vacuum Tube Features: Qirui All-glass Vacuum Tube is made of dual borosilicate glass tubes, the space between the two tubes is evacuated. The AL/N/AL selective coating on the outer wall of the inner tube absorbs sunshine and transforms it into heat which in turn heats the cold water in the inner tube. When the water in the tube is heated, its density will decrease and will go upward into the tank; Meanwhile the cold water in the tank
